GET https://content.gamingdesktop.com.au/admin/description/2926/edit?page=356

Response
200 OK
IP
216.73.217.79
Profiled on
Token
1014cd

Forms

  • Description
    • ea_form_fieldset_01KQ5XQJXNAJ9YRTQ171EARTV2
    • sku
    • lsDescription
    • alloyDescription
    • alloyShortDescription
    • alloyFeaturesBenefits
    • mmtDescription
    • dsDescription
    • dsFeaturesHtml
    • icecatDescription
    • icecatShortDescription
    • icecatFeatures
    • icecatSpecifications
    • icecatMiddleDescription
    • icecatLongSummary
    • ea_form_fieldset_close_01KQ5XQJXNAJ9YRTQ171EARTV2
    • _token

Description

Form type: 
"EasyCorp\Bundle\EasyAdminBundle\Form\Type\CrudFormType"

Errors

This form has no errors.

Default Data

Property Value
Model Format same as normalized format
Normalized Format 
App\Entity\Description {#826
  -id: 2926
  -sku: "MC112CS"
  -lsDescription: """
    TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
    \r\n
    Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
    \r\n
    What This Product Does\r\n
    The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
    Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
    The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
    So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
    \r\n
    MEDIA CONVERTER & MODULE\r\n
    Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
    Basic Function\tAdopts WDM technology\r\n
    Half/Full-Duplex transfer mode for FX port\r\n
    Full Duplex Flow Control (IEEE 802.3x)\r\n
    Half Duplex Flow Control (Backpressure)\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Extends fiber distance up to 20km\r\n
    Ports\t1 100M SC/UPC port\r\n
    1 100M RJ45 port (Auto MDI/MDIX)\r\n
    Wave Length\t1310nm Tx/1550nm Rx\r\n
    WDM TX\t1310nm\r\n
    WDM RX\t1550nm\r\n
    Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-FX\tSingle-mode Fiber\r\n
    LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
    Power Supply\tExternal Power Adapte
    """
  -alloyDescription: null
  -alloyShortDescription: null
  -alloyFeaturesBenefits: null
  -mmtDescription: null
  -dsDescription: null
  -dsFeaturesHtml: null
  -icecatDescription: null
  -icecatShortDescription: null
  -icecatFeatures: null
  -icecatSpecifications: null
  -icecatMiddleDescription: null
  -icecatLongSummary: null
  -icecatBulletPoints: null
}
View Format same as normalized format

Submitted Data

This form was not submitted.

Passed Options

Option Passed Value Resolved Value
attr 
[
  "class" => "ea-edit-form"
  "id" => "edit-Description-form"
]
 
[
  "class" => "ea-edit-form"
  "id" => "edit-Description-form"
]
data 
App\Entity\Description {#826
  -id: 2926
  -sku: "MC112CS"
  -lsDescription: """
    TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
    \r\n
    Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
    \r\n
    What This Product Does\r\n
    The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
    Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
    The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
    So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
    \r\n
    MEDIA CONVERTER & MODULE\r\n
    Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
    Basic Function\tAdopts WDM technology\r\n
    Half/Full-Duplex transfer mode for FX port\r\n
    Full Duplex Flow Control (IEEE 802.3x)\r\n
    Half Duplex Flow Control (Backpressure)\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Extends fiber distance up to 20km\r\n
    Ports\t1 100M SC/UPC port\r\n
    1 100M RJ45 port (Auto MDI/MDIX)\r\n
    Wave Length\t1310nm Tx/1550nm Rx\r\n
    WDM TX\t1310nm\r\n
    WDM RX\t1550nm\r\n
    Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-FX\tSingle-mode Fiber\r\n
    LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
    Power Supply\tExternal Power Adapte
    """
  -alloyDescription: null
  -alloyShortDescription: null
  -alloyFeaturesBenefits: null
  -mmtDescription: null
  -dsDescription: null
  -dsFeaturesHtml: null
  -icecatDescription: null
  -icecatShortDescription: null
  -icecatFeatures: null
  -icecatSpecifications: null
  -icecatMiddleDescription: null
  -icecatLongSummary: null
  -icecatBulletPoints: null
}
 same as passed value
entityDto 
EasyCorp\Bundle\EasyAdminBundle\Dto\EntityDto {#748
  -isAccessible: true
  -instance: App\Entity\Description {#826
    -id: 2926
    -sku: "MC112CS"
    -lsDescription: """
      TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
      \r\n
      Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
      Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
      Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
      \r\n
      What This Product Does\r\n
      The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
      Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
      The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
      So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
      \r\n
      MEDIA CONVERTER & MODULE\r\n
      Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
      Basic Function\tAdopts WDM technology\r\n
      Half/Full-Duplex transfer mode for FX port\r\n
      Full Duplex Flow Control (IEEE 802.3x)\r\n
      Half Duplex Flow Control (Backpressure)\r\n
      Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
      Extends fiber distance up to 20km\r\n
      Ports\t1 100M SC/UPC port\r\n
      1 100M RJ45 port (Auto MDI/MDIX)\r\n
      Wave Length\t1310nm Tx/1550nm Rx\r\n
      WDM TX\t1310nm\r\n
      WDM RX\t1550nm\r\n
      Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
      EIA/TIA-568 100 STP (maximum 100m)\r\n
      Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
      EIA/TIA-568 100 STP (maximum 100m)\r\n
      Network Media 100BASE-FX\tSingle-mode Fiber\r\n
      LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
      Power Supply\tExternal Power Adapte
      """
    -alloyDescription: null
    -alloyShortDescription: null
    -alloyFeaturesBenefits: null
    -mmtDescription: null
    -dsDescription: null
    -dsFeaturesHtml: null
    -icecatDescription: null
    -icecatShortDescription: null
    -icecatFeatures: null
    -icecatSpecifications: null
    -icecatMiddleDescription: null
    -icecatLongSummary: null
    -icecatBulletPoints: null
  }
  -primaryKeyValue: 2926
  -fields: EasyCorp\Bundle\EasyAdminBundle\Collection\FieldCollection {#1156 …}
  -actions: EasyCorp\Bundle\EasyAdminBundle\Collection\ActionCollection {#1639 …}
  -defaultActionUrl: null
  -fqcn: "App\Entity\Description"
  -metadata: Doctrine\ORM\Mapping\ClassMetadata {#779 …}
  -permission: null
}
 same as passed value
translation_domain 
"messages"
 same as passed value

Resolved Options

Option Value
action 
""
allow_extra_fields 
true
allow_file_upload 
false
attr 
[
  "class" => "ea-edit-form"
  "id" => "edit-Description-form"
]
attr_translation_parameters 
[]
auto_initialize 
true
block_name 
null
block_prefix 
null
by_reference 
true
compound 
true
constraints 
[]
csrf_field_name 
"_token"
csrf_message 
"The CSRF token is invalid. Please try to resubmit the form."
csrf_protection 
true
csrf_token_id 
"submit"
csrf_token_manager 
Symfony\Component\Security\Csrf\SameOriginCsrfTokenManager {#582
  -requestStack: Symfony\Component\HttpFoundation\RequestStack {#332 …}
  -logger: Monolog\Logger {#154 …}
  -fallbackCsrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#583 …}
  -tokenIds: [
    "submit" => 0
    "authenticate" => 1
    "logout" => 2
  ]
  -checkHeader: 1
  -cookieName: "csrf-token"
}
data 
App\Entity\Description {#826
  -id: 2926
  -sku: "MC112CS"
  -lsDescription: """
    TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
    \r\n
    Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
    \r\n
    What This Product Does\r\n
    The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
    Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
    The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
    So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
    \r\n
    MEDIA CONVERTER & MODULE\r\n
    Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
    Basic Function\tAdopts WDM technology\r\n
    Half/Full-Duplex transfer mode for FX port\r\n
    Full Duplex Flow Control (IEEE 802.3x)\r\n
    Half Duplex Flow Control (Backpressure)\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Extends fiber distance up to 20km\r\n
    Ports\t1 100M SC/UPC port\r\n
    1 100M RJ45 port (Auto MDI/MDIX)\r\n
    Wave Length\t1310nm Tx/1550nm Rx\r\n
    WDM TX\t1310nm\r\n
    WDM RX\t1550nm\r\n
    Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-FX\tSingle-mode Fiber\r\n
    LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
    Power Supply\tExternal Power Adapte
    """
  -alloyDescription: null
  -alloyShortDescription: null
  -alloyFeaturesBenefits: null
  -mmtDescription: null
  -dsDescription: null
  -dsFeaturesHtml: null
  -icecatDescription: null
  -icecatShortDescription: null
  -icecatFeatures: null
  -icecatSpecifications: null
  -icecatMiddleDescription: null
  -icecatLongSummary: null
  -icecatBulletPoints: null
}
data_class 
"App\Entity\Description"
disabled 
false
empty_data 
Closure(FormInterface $form) {#1652
  class: "Symfony\Component\Form\Extension\Core\Type\FormType"
  use: {
    $class: "App\Entity\Description"
  }
}
entityDto 
EasyCorp\Bundle\EasyAdminBundle\Dto\EntityDto {#748
  -isAccessible: true
  -instance: App\Entity\Description {#826
    -id: 2926
    -sku: "MC112CS"
    -lsDescription: """
      TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
      \r\n
      Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
      Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
      Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
      \r\n
      What This Product Does\r\n
      The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
      Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
      The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
      So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
      \r\n
      MEDIA CONVERTER & MODULE\r\n
      Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
      Basic Function\tAdopts WDM technology\r\n
      Half/Full-Duplex transfer mode for FX port\r\n
      Full Duplex Flow Control (IEEE 802.3x)\r\n
      Half Duplex Flow Control (Backpressure)\r\n
      Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
      Extends fiber distance up to 20km\r\n
      Ports\t1 100M SC/UPC port\r\n
      1 100M RJ45 port (Auto MDI/MDIX)\r\n
      Wave Length\t1310nm Tx/1550nm Rx\r\n
      WDM TX\t1310nm\r\n
      WDM RX\t1550nm\r\n
      Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
      EIA/TIA-568 100 STP (maximum 100m)\r\n
      Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
      EIA/TIA-568 100 STP (maximum 100m)\r\n
      Network Media 100BASE-FX\tSingle-mode Fiber\r\n
      LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
      Power Supply\tExternal Power Adapte
      """
    -alloyDescription: null
    -alloyShortDescription: null
    -alloyFeaturesBenefits: null
    -mmtDescription: null
    -dsDescription: null
    -dsFeaturesHtml: null
    -icecatDescription: null
    -icecatShortDescription: null
    -icecatFeatures: null
    -icecatSpecifications: null
    -icecatMiddleDescription: null
    -icecatLongSummary: null
    -icecatBulletPoints: null
  }
  -primaryKeyValue: 2926
  -fields: EasyCorp\Bundle\EasyAdminBundle\Collection\FieldCollection {#1156 …}
  -actions: EasyCorp\Bundle\EasyAdminBundle\Collection\ActionCollection {#1639 …}
  -defaultActionUrl: null
  -fqcn: "App\Entity\Description"
  -metadata: Doctrine\ORM\Mapping\ClassMetadata {#779 …}
  -permission: null
}
error_bubbling 
true
error_mapping 
[]
extra_fields_message 
"This form should not contain extra fields."
form_attr 
false
getter 
null
help 
null
help_attr 
[]
help_html 
false
help_translation_parameters 
[]
inherit_data 
false
invalid_message 
"This value is not valid."
invalid_message_parameters 
[]
is_empty_callback 
null
label 
null
label_attr 
[]
label_format 
null
label_html 
false
label_translation_parameters 
[]
mapped 
true
method 
"POST"
post_max_size_message 
"The uploaded file was too large. Please try to upload a smaller file."
priority 
0
property_path 
null
required 
true
row_attr 
[]
setter 
null
translation_domain 
"messages"
trim 
true
upload_max_size_message 
Closure() {#1650
  class: "Symfony\Component\Form\Extension\Validator\Type\UploadValidatorExtension"
  use: {
    $translator: Symfony\Component\Translation\DataCollectorTranslator {#955 …}
    $message: Closure() {#1653 …}
    $translationDomain: "validators"
  }
}
validation_groups 
null

View Vars

Variable Value
action 
""
attr 
[
  "class" => "ea-edit-form"
  "id" => "edit-Description-form"
]
attr_translation_parameters 
[]
block_prefixes 
[
  "form"
  "ea_crud"
  "_Description"
]
cache_key 
"_Description_ea_crud"
compound 
true
data 
App\Entity\Description {#826
  -id: 2926
  -sku: "MC112CS"
  -lsDescription: """
    TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
    \r\n
    Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
    \r\n
    What This Product Does\r\n
    The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
    Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
    The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
    So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
    \r\n
    MEDIA CONVERTER & MODULE\r\n
    Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
    Basic Function\tAdopts WDM technology\r\n
    Half/Full-Duplex transfer mode for FX port\r\n
    Full Duplex Flow Control (IEEE 802.3x)\r\n
    Half Duplex Flow Control (Backpressure)\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Extends fiber distance up to 20km\r\n
    Ports\t1 100M SC/UPC port\r\n
    1 100M RJ45 port (Auto MDI/MDIX)\r\n
    Wave Length\t1310nm Tx/1550nm Rx\r\n
    WDM TX\t1310nm\r\n
    WDM RX\t1550nm\r\n
    Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-FX\tSingle-mode Fiber\r\n
    LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
    Power Supply\tExternal Power Adapte
    """
  -alloyDescription: null
  -alloyShortDescription: null
  -alloyFeaturesBenefits: null
  -mmtDescription: null
  -dsDescription: null
  -dsFeaturesHtml: null
  -icecatDescription: null
  -icecatShortDescription: null
  -icecatFeatures: null
  -icecatSpecifications: null
  -icecatMiddleDescription: null
  -icecatLongSummary: null
  -icecatBulletPoints: null
}
disabled 
false
ea_crud_form 
[
  "assets" => "** This variable no longer stores field assets. Instead, use "ea.crud.fieldAssets()" in your Twig template."
  "entity" => EasyCorp\Bundle\EasyAdminBundle\Dto\EntityDto {#748
    -isAccessible: true
    -instance: App\Entity\Description {#826
      -id: 2926
      -sku: "MC112CS"
      -lsDescription: """
        TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
        \r\n
        Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
        Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
        Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
        \r\n
        What This Product Does\r\n
        The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
        Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
        The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
        So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
        \r\n
        MEDIA CONVERTER & MODULE\r\n
        Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
        Basic Function\tAdopts WDM technology\r\n
        Half/Full-Duplex transfer mode for FX port\r\n
        Full Duplex Flow Control (IEEE 802.3x)\r\n
        Half Duplex Flow Control (Backpressure)\r\n
        Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
        Extends fiber distance up to 20km\r\n
        Ports\t1 100M SC/UPC port\r\n
        1 100M RJ45 port (Auto MDI/MDIX)\r\n
        Wave Length\t1310nm Tx/1550nm Rx\r\n
        WDM TX\t1310nm\r\n
        WDM RX\t1550nm\r\n
        Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
        EIA/TIA-568 100 STP (maximum 100m)\r\n
        Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
        EIA/TIA-568 100 STP (maximum 100m)\r\n
        Network Media 100BASE-FX\tSingle-mode Fiber\r\n
        LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
        Power Supply\tExternal Power Adapte
        """
      -alloyDescription: null
      -alloyShortDescription: null
      -alloyFeaturesBenefits: null
      -mmtDescription: null
      -dsDescription: null
      -dsFeaturesHtml: null
      -icecatDescription: null
      -icecatShortDescription: null
      -icecatFeatures: null
      -icecatSpecifications: null
      -icecatMiddleDescription: null
      -icecatLongSummary: null
      -icecatBulletPoints: null
    }
    -primaryKeyValue: 2926
    -fields: EasyCorp\Bundle\EasyAdminBundle\Collection\FieldCollection {#1156 …}
    -actions: EasyCorp\Bundle\EasyAdminBundle\Collection\ActionCollection {#1639 …}
    -defaultActionUrl: null
    -fqcn: "App\Entity\Description"
    -metadata: Doctrine\ORM\Mapping\ClassMetadata {#779 …}
    -permission: null
  }
  "form_tabs" => []
  "form_fieldsets" => []
]
ea_vars 
EasyCorp\Bundle\EasyAdminBundle\Dto\FormVarsDto {#1979
  -fieldDto: null
  -entityDto: null
}
errors 
Symfony\Component\Form\FormErrorIterator {#1880
  -errors: []
  -form: Symfony\Component\Form\Form {#1819 …}
}
form 
Symfony\Component\Form\FormView {#1729 …5}
full_name 
"Description"
help 
null
help_attr 
[]
help_html 
false
help_translation_parameters 
[]
id 
"Description"
label 
null
label_attr 
[]
label_format 
null
label_html 
false
label_translation_parameters 
[]
method 
"POST"
multipart 
false
name 
"Description"
priority 
0
required 
true
row_attr 
[]
submitted 
false
translation_domain 
"messages"
unique_block_prefix 
"_Description"
valid 
true
value 
App\Entity\Description {#826
  -id: 2926
  -sku: "MC112CS"
  -lsDescription: """
    TP-Link MC112CS WDM Media Converter 10/100Mbps RJ45 to 100M single-mode SC fiber Tx:1310nm Rx:1550nm up to 20km\r\n
    \r\n
    Complies with 802.3u 10/100Base-TX, 100Base-FX standards.\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Adopts WDM technology, transmitting and receiving data on one single fiber\r\n
    \r\n
    What This Product Does\r\n
    The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. \r\n
    Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. \r\n
    The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. \r\n
    So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINKs media converter MC111CS is just one of the examples to cooperate with MC112CS.\r\n
    \r\n
    MEDIA CONVERTER & MODULE\r\n
    Standards and Protocols\tIEEE 802.3, IEEE 802.3u, IEEE 802.3x\r\n
    Basic Function\tAdopts WDM technology\r\n
    Half/Full-Duplex transfer mode for FX port\r\n
    Full Duplex Flow Control (IEEE 802.3x)\r\n
    Half Duplex Flow Control (Backpressure)\r\n
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely\r\n
    Extends fiber distance up to 20km\r\n
    Ports\t1 100M SC/UPC port\r\n
    1 100M RJ45 port (Auto MDI/MDIX)\r\n
    Wave Length\t1310nm Tx/1550nm Rx\r\n
    WDM TX\t1310nm\r\n
    WDM RX\t1550nm\r\n
    Network Media 10BASE-T\tUTP category 3, 4, 5 cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-T\tUTP category 5, 5e cable (maximum 100m)\r\n
    EIA/TIA-568 100 STP (maximum 100m)\r\n
    Network Media 100BASE-FX\tSingle-mode Fiber\r\n
    LED Indicators\tPWR, FDX/Col, Link/Act, SPD\r\n
    Power Supply\tExternal Power Adapte
    """
  -alloyDescription: null
  -alloyShortDescription: null
  -alloyFeaturesBenefits: null
  -mmtDescription: null
  -dsDescription: null
  -dsFeaturesHtml: null
  -icecatDescription: null
  -icecatShortDescription: null
  -icecatFeatures: null
  -icecatSpecifications: null
  -icecatMiddleDescription: null
  -icecatLongSummary: null
  -icecatBulletPoints: null
}